山東模具制造廠家為什么要試模？山東模具制造廠家經常會遇到新產品開發及老模具的更新，但很多情況下都會因?yàn)檫@個原因那個操作的出現不好，所以要通過試模對模具制作中的一些問題加以檢驗和修正。
Shandong mold manufacturers why to try the mold? Shandong mold manufacturers often encounter new product development and old mold update, but in many cases, because of this reason, the operation is not good, so it is necessary to test and correct some problems in mold production through mold trial.
山東模具廠家生產的模具都希望是“適應性”好（即成型參數或工藝條件寬）的模具。但在生產過程中，由于設計考慮不好或加工不充分，經常會出現一些問題，如尺寸過大、局部過渡不平滑、結構不合適等，導致鑄件或試模不合格，而試用是找出模具問題的一種簡單直接的方法。
Shandong mold manufacturers hope to produce molds that are "adaptable" (that is, forming parameters or process conditions wide). But in the production process, because the design consideration is not good or processing is not sufficient, often there will be some problems, such as too large size, local transition is not smooth, the structure is not suitable, leading to the casting or mold test is unqualified, and trial is a simple and direct method to find out the mold problem.
找出更好的成型條件在試模過程中，試模員可以找到一組合適的工藝數據，這組數據可以作為批量生產時設置機器參數的默認值，并據此進行調整數據集模具批量生產的工藝條件。驗證CAE輔助設計并提高后續工作效率的CAE分析軟件是根據真機規格、真合金性能和真實外部環境，通過計算機模擬，將模擬計算的結果。
In the process of mold testing, the tester can find a suitable set of process data, which can be used as the default value of machine parameters set during mass production, and adjust the process conditions of mold mass production based on the data set. Verify CAE aided design and improve the follow-up work efficiency of CAE analysis software is according to the real machine specifications, real alloy properties and real external environment, through computer simulation, will simulate the results of calculation.
模具設計人員根據模擬情況對模具設計進行相應修正；分析數據在真機試模時可直接作為預設值輸入，山東模具廠家可借此檢查分析模具設計是否有欠缺。測試模塊的不足之處可以與仿真結果進行對比分析，為后續工藝參數設置提供依據。
The mold designer revises the mold design according to the simulation; The analysis data can be directly input as the default value when the real machine tries the mold. Shandong mold manufacturer can check whether there is any deficiency in the analysis mold design. The shortcomings of the test module can be compared with the simulation results to provide a basis for the subsequent process parameter setting.
山東模具制造廠家試模的主要目的是找出優化的工藝參數和模具修改方案，要求即使材料、機器等因素，也能保證模具穩定、不間斷地量產合格。設置或環境已更改。產品，提高模具的“適應性”，而不是僅僅為了得到幾個好的試用樣品。
The main purpose of shandong mold manufacturer's mold test is to find out the optimized process parameters and mold modification plan, even if the material, machine and other factors, can ensure the mold stable, uninterrupted mass production qualified. The Settings or environment have changed. Product, improve mold "adaptability", not just to get a few good trial samples.
山東模具制造廠家為什么要試模？?jī)?nèi)容便是以上講解了，可以說真的是有必要對制作完成的模具進行試模，這樣才能出產出質量好的使用率高的注塑加工產品。更多內容的了解就來我們網站
www.qczdm.com看看吧。
Shandong mold manufacturers why to try the mold? Content is the above explanation, you can really say that it is necessary to complete the production of the mold for testing, so as to produce good quality injection molding products with high utilization rate. For more information, please visit our website www.qczdm.com.
